Multi-Line Lubrication System

  • Multi-line
  • Self-contained, Programable Motor Driven Package
  • Suitable for oil and grease
  • Simple design, (multiple feed lines, pump to point)
  • Positive Displacement Injector deliveries with dedicated injector and feed line
  • Suitable for small, medium applications
  • Easy installation and modificaton
  • One Year Warranty

AX-system_ Voltage Ranges: 110v AC 50/60Hz
240v AC 50/60Hz
Motor Type: Geared Synchronous
Reservoir Capacity: 2 lbs./1 quarts
Distribution Tubing: Black 5/32" OD nylon tubing used to route lubricant to each bearing point.  Ultra violet stabilized, burst pressure 2500 lbs./square inch.
Cycle Times: Continuous to 2 hours
No. of Bearing Points: 1 to 36 bearing points.
Recommended Lubricants & their Temperature Ranges: 150 degrees F maximum ambient temperature.
Oils = 110F to -40F
Grade 000 = 110F to -30F
Grade 00 = 110F to -20F
Grade 0 (most types) = 110F to -10F
Grade 1 (most types) = 110F to 0F
Grade 2** (most types) = 110F to 10F
**Not recommended to use the 36 port AX pump with NLGI Grade 2 grease in ambient temperatures below 40 degrees F.

REDI-MOUNT The Easy Way to Solve Difficult Lubrication Problems