AX REDI-MOUNT™ System

Multi-Line Lubrication System

  • Multi-line
  • Self-contained, Programable Motor Driven Package
  • Suitable for oil and grease
  • Can operate in -40F/-40C
  • Simple design, (multiple feed lines, pump to point)
  • Positive Displacement Injector deliveries with dedicated injector and feed line
  • Suitable for small, medium applications
  • Easy installation and modificaton
  • One Year Warranty
Voltage Ranges: 110v AC 50/60Hz
240v AC 50/60Hz
Motor Type: Geared Synchronous
Reservoir Capacity: 2 lbs./1 quarts
Distribution Tubing: Black 5/32″ OD nylon tubing used to route lubricant to each bearing point.  Ultra violet stabilized, burst pressure 2500 lbs./square inch.

Cycle Times:Continuous to 2 hours No. of Bearing Points:1 to 36 bearing points. Recommended Lubricants & their Temperature Ranges:150 degrees F maximum ambient temperature.
Oils = 110F to -40F
Grade 000 = 110F to -30F
Grade 00  = 110F to -20F
Grade 0 (most types) = 110F to -10F
Grade 1 (most types) = 110F to 0F
Grade 2** (most types) = 110F to 10F
**Not recommended to use the 36 port AX pump with NLGI Grade 2 grease in ambient temperatures below 40 degrees F.

REDI-MOUNT™ The Easy Way to Solve Difficult Lubrication Problems